Starboard Mast Set Aluminium V7 Top Plate

Ref:
Combine the aluminium mast with the different wing set to have your complete hydrofoil
Please select your options
82cm
82cm
72cm
72cm
Not Available
539.00
Not Available
Add to cart 

Not Available
Inquire
Secure payment
Do you have doubts? We call you!


Be the first to rate!
Starboard Mast Set Aluminium V7 Top Plate
Information
Comments
Information
The aluminium V7 gives you Maximum stiffness and strength. Wall thickness is reduced and three internal cavities are maximised to bring weight down to a minimum. Three load-bearing I-beams run down the length of the mast for maximum strength and stiffness. The front and back stringers are made extra thick and carry vertical loads through two 12mm wide stainless steel barrel nuts.

The mast's core is made from extruded Aluminium 6061 that is anodized and then sealed water-tight. The ends are then machined by CNC and spacers made from Akulon (a type of recycled plastic that is extremely tough and stiff) are finally fitted on both ends. Two side-bolts allow us to maximise connection strength and stiffness without adding wall-thickness. If you undo these bolts and the two vertical bolts, you can remove the top plate mount and (surprise!) there is a Deep Tuttle fitting inside. 2 in 1. 

Quick Lock fuselages are split into two pieces: the front piece and the tail piece. The tail piece is supplied with the Wing Set and the front piece is supplied with the Mast Set. The fuselage front piece needs to be assembled to the mast when you first unbox your Mast Set. Once assembled, this front piece doesn't need to be removed from the mast anymore.

Some progressing riders may prefer the Aluminium V7 mast that sinks the foil, making it act like a keel and helping to keep the board flat and stable.

The Aluminium V7 mast sets are very stiff and strong. With an Aluminium V7 mast set, foil weights start from 3.4kg.

Watch the following video about the Hyper Foil board with the Starboard Hydrofoil:
 
Comments
Leave your comment