Duotone Wing Set Aero Carve 2.0 D/LAB
Ref:
DUO-42240-3829-500
Please select your options
500
650
850
1100
U
In Stock
€849.00
In Stock
In Stock
Delivery in 7-12 days
Secure payment
Do you have doubts? We call you!
Information
Comments
Information
The most advanced front wings to date from Duotone.
In search of reducing the drag and weight of the foils to a minimum, Duotone decided to merge the front wing and front half of the fuselage together. This eliminates any compromise in terms of shaping the front wing to fit our fuselage front wing mount. It also allows to remove the three bolts which are necessary to fix our "bolt on" SLS front wings on the fuselages, reducing the drag and weight even more.
The Carve 2.0 D/LAB, same as the SLS variant, are quite different to the previous Carve range. They feel a lot less draggy and way looser in terms of roll, allowing the rider to do heel side to toe side turns way more naturally. The top end speed has also been increased thanks to a thinner profile towards the wing tips and the higher aspect ratio allows the Carve 2.0 D/LAB to glide and pump much better than its predecessor.
The Carve 2.0 D/LAB range is based on the new Carve 2.0 SLS range but with a few little tweaks. Compared to the SLS range, the aspect ratio is slightly lower and the profile a bit thinner and faster, to allow these wings to be pushed to higher speeds, whether it is going down fast waves, throwing the most technical Freestyle tricks or even using them for Wing Foil or Kite Foil racing.
The D/LAB range also introduces two smaller sizes, the 650 and 500, but doesn’t include the bigger 1430 found in the SLS range.
Two carbon tail options in 37cm and 43cm, respectively matching the lengths of our 60cm and 66cm AL 3BS fuselages ,complete the D/LAB glider for either a loose and playful character, or higher control at top speeds. If you want the ultimate performance, the Carve 2.0 D/LAB is the choice for any advanced to top level riders.
Stabilizer P
The latest range of stabilizers, specially designed to complement the Carve 2.0 and Glide ranges.
The P series stands for performance. Duotone increased the aspect ratio of the stabilizers so that they would produce more lift whilst being smaller in surface area. Doing so helped to decrease the drag and increase the maneuvrability without loosing that high speed control which Duotone foils are famous for.
The P Stabilizers are available in four sizes, 165/180/200/220. Each of them slightly tweaked to work perfectly with the new front wings.
These new stabs are almost completely flat and have lost the little winglets which can be found on the other range: the C Stabilizers.
By making these changes they were able to loosen the feel in the turns, which gives an exciting flavour to the new front wings.
Take full advantage of the brand new thin shims and tweak the angle of attack of your stabilizer by +/- 0.3 degrees increments, to suit your particular riding style, or the conditions on a given day.
Aero Carve 2.0 SLS 500 the smallest and most radical front wings. The Aero Carve 2.0 D/LAB 500 is targeted to kids/light riders or experienced ones wanting to tackle big fast waves on their wings or kitefoil at Mach 2 speeds. Tweaked to maintain a good level of control when going full speed when paired with the 43cm tail, or to be super turny when used with the 37cm tail. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
Aero Carve 2.0 SLS 650 the second smallest wing in the range, targeted to kids/lighter riders or experienced ones looking for extra speed, whether it is to tackle bigger waves, freestyle on the wing or challenge your friends on a kitefoil race. Rig it with 37 tail for maximum manoeuvrability in the waves or pick the 43 tail for more control at high speed. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
Aero Carve 2.0 SLS 850 has it all, it’s got instant turning and response in the waves, exciting speeds for both winging and kite foiling, incredible pop for Freestyle and the glide and low drag efficiency to make it through flat sections. This is the one wing to have in your quiver.
Aero Carve 2.0 SLS 1100 the biggest wing in the D/Lab family. Advanced riders will choose this wing for waveriding in small to medium waves and freestylers will love it in light to medium wind conditions. Best suited to heavy kitefoilers or very light conditions, the 1100 D/Lab is a great allrounder that feels slippery for it size and easy to use. It can also be used for prone surfing, where its turning ability is only matched by the smaller Carve 2.0’s, although realistically it will not pump as well as our other higher aspect front wings.
Watch the new Aero Carve 2.0 D/Lab set in action:
In search of reducing the drag and weight of the foils to a minimum, Duotone decided to merge the front wing and front half of the fuselage together. This eliminates any compromise in terms of shaping the front wing to fit our fuselage front wing mount. It also allows to remove the three bolts which are necessary to fix our "bolt on" SLS front wings on the fuselages, reducing the drag and weight even more.
The Carve 2.0 D/LAB, same as the SLS variant, are quite different to the previous Carve range. They feel a lot less draggy and way looser in terms of roll, allowing the rider to do heel side to toe side turns way more naturally. The top end speed has also been increased thanks to a thinner profile towards the wing tips and the higher aspect ratio allows the Carve 2.0 D/LAB to glide and pump much better than its predecessor.
The Carve 2.0 D/LAB range is based on the new Carve 2.0 SLS range but with a few little tweaks. Compared to the SLS range, the aspect ratio is slightly lower and the profile a bit thinner and faster, to allow these wings to be pushed to higher speeds, whether it is going down fast waves, throwing the most technical Freestyle tricks or even using them for Wing Foil or Kite Foil racing.
The D/LAB range also introduces two smaller sizes, the 650 and 500, but doesn’t include the bigger 1430 found in the SLS range.
Two carbon tail options in 37cm and 43cm, respectively matching the lengths of our 60cm and 66cm AL 3BS fuselages ,complete the D/LAB glider for either a loose and playful character, or higher control at top speeds. If you want the ultimate performance, the Carve 2.0 D/LAB is the choice for any advanced to top level riders.
Stabilizer P
The latest range of stabilizers, specially designed to complement the Carve 2.0 and Glide ranges.
The P series stands for performance. Duotone increased the aspect ratio of the stabilizers so that they would produce more lift whilst being smaller in surface area. Doing so helped to decrease the drag and increase the maneuvrability without loosing that high speed control which Duotone foils are famous for.
The P Stabilizers are available in four sizes, 165/180/200/220. Each of them slightly tweaked to work perfectly with the new front wings.
These new stabs are almost completely flat and have lost the little winglets which can be found on the other range: the C Stabilizers.
By making these changes they were able to loosen the feel in the turns, which gives an exciting flavour to the new front wings.
Take full advantage of the brand new thin shims and tweak the angle of attack of your stabilizer by +/- 0.3 degrees increments, to suit your particular riding style, or the conditions on a given day.
Aero Carve 2.0 SLS 500 the smallest and most radical front wings. The Aero Carve 2.0 D/LAB 500 is targeted to kids/light riders or experienced ones wanting to tackle big fast waves on their wings or kitefoil at Mach 2 speeds. Tweaked to maintain a good level of control when going full speed when paired with the 43cm tail, or to be super turny when used with the 37cm tail. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
Aero Carve 2.0 SLS 650 the second smallest wing in the range, targeted to kids/lighter riders or experienced ones looking for extra speed, whether it is to tackle bigger waves, freestyle on the wing or challenge your friends on a kitefoil race. Rig it with 37 tail for maximum manoeuvrability in the waves or pick the 43 tail for more control at high speed. Ideally paired with the 165 P stabilizer and +0.3 deg shim.
Aero Carve 2.0 SLS 850 has it all, it’s got instant turning and response in the waves, exciting speeds for both winging and kite foiling, incredible pop for Freestyle and the glide and low drag efficiency to make it through flat sections. This is the one wing to have in your quiver.
Aero Carve 2.0 SLS 1100 the biggest wing in the D/Lab family. Advanced riders will choose this wing for waveriding in small to medium waves and freestylers will love it in light to medium wind conditions. Best suited to heavy kitefoilers or very light conditions, the 1100 D/Lab is a great allrounder that feels slippery for it size and easy to use. It can also be used for prone surfing, where its turning ability is only matched by the smaller Carve 2.0’s, although realistically it will not pump as well as our other higher aspect front wings.
| MODEL | 500 | 650 | 850 | 1100 |
|---|---|---|---|---|
| SURFACE (cm2/in2) | 500 / 77.5 | 650 / 100.8 | 850 / 131.8 | 1100 / 170.5 |
| SPAN | 61 / 23.9 | 66 / 26.1 | 73 / 28.9 | 81 / 32.0 |
| ASPECT RATIO | 7.5 | 6.8 | 6.3 | 6.0 |
| ESTABILIZER | P165 | P165 | P180 | P200 |
| SCREWS | TAIL SCREWl: M6x25 / MAST SCREW: 3x M8x50M6x25 | |||
Watch the new Aero Carve 2.0 D/Lab set in action:
Comments
